seogwangtech company limited

Seogwang Tech

Seogwang Tech Company Limited

Product List

1. Desizing Agent

product	use	Main composition	appearance	Ionic	amount used	characteristic
Splitter Seg 705	Oxidizing agent	Special Peroxide	white powder	Bionic	0.5~1.5% (based on fabric weight)	Excellent penetration bonding and decomposition ability for natural and synthetic fillers. Fast decomposition of the sizing residue prevents re-attachment.
Splitter AC	Acrylic type sizing agent	Special Peroxide	white powder	Bionic	1~5 g/ℓ	The most suitable sizing agent for acrylic resins. Sizing, refining, and bleaching can be done in one bath. Excellent effect in soaping process.
Splitter 700	High temperature enzyme desizing agent	α-amylase	Brown liquid		0.5~1.0 g/ℓ	Biodegrading natural starch, starch derivatives or compounds thereof used in the slurry, making them easily soluble in water, and removing the slurry without damage.
Divider Seg TM	Enzyme desizing agent for medium temperature	α-amylase	Brown liquid		0.5~1.0 g/ℓ	Selective and efficient removal without fiber damage even at medium temperatures.

2. Penetrating/Scouring Agent

product	use	Main composition	appearance	Ionic	amount used	characteristic
SegScore Seg D-70 Seg SH-70	Wetting penetrant concentrate	polyethylene derivatives	Yellowish transparent liquid	Bionic / Anionic	1~5 g/ℓ	A low-foaming, alkaline penetrating agent with excellent penetration and diffusion properties. Excellent emulsifying and dispersing ability.
SegScore Seg AP-25	Eco-friendly refining agent	Polyoxy- ethylene alkyl- ester	Colorless viscous liquid	Bionic / Anionic	2~4 g/ℓ	A refining penetrant for natural and synthetic fibers for penetration, cleaning and solubilization . Used in pretreatment, bleaching, dyeing, etc.
Segwet PN	Low-foam penetration refining agent	Special ionic and anionic activator compounds	Yellowish transparent liquid	Bionic / weakly anionic	0.3~3 g/ℓ	Wetting detergent with low foaming properties, stability in alkaline environments, and excellent penetrability . Pretreatment agent with excellent ability to prevent re-attachment of impurities .
SegScore NA	Alkali penetrant for slicing	Alkyl ester salt	Yellowish transparent liquid	Anionic	1~3 g/ℓ	Alkali-resistant penetrant for mercerizing of gray-free fabrics and continuous weight-loss processing of polyester fabrics , long-term stability in alkaline solutions below 34Be

3. Degreasing and de-oiling agent

product	use	Main composition	appearance	Ionic	amount used	characteristic
Seg Oil Seg ACT-30	Degreasing agent	Polyoxy- ethylene alkyl ether	Yellowish transparent liquid	Nonionic / Anionic	1~2 g/ℓ	Degreasing and de-oiling agent for pretreatment of synthetic fibers, spandex, etc. Excellent anti-re-adhesion ability. Excellent wetting power.
Seg Oil 50	Degreasing agent	Polyhydric alcohol fatty acid system	Colorless viscous liquid	Nonionic / Anionic	1~5 g/ℓ	It has strong degreasing power and excellent emulsifying and dispersing properties, so it can be used in refining processes. It completely removes oil spots that occur during weaving and twisting of various fibers .
Seg Oil 30	Degreasing agent	Polyhydric alcohol fatty acid system	Colorless viscous liquid	Nonionic / Anionic	3~7 g/ℓ	Powerful degreasing power to remove grease contaminated with synthetic and natural fibers . Good at preventing re-adhesion during scouring.

4. Stabilizing/Neutralizing Agent

product	use	Main composition	appearance	Ionic	amount used	characteristic
Segon NS	Non-silicic acid hydrogen peroxide stabilizer	Polyhydric alcohol lactate ester	Yellowish liquid	Bionic/ Anionic	2~9 g/ℓ	By controlling the decomposition of hydrogen peroxide , whiteness of the dyed product is guaranteed. By not including silicic acid, removal of various impurities and scabs of the dyed product is maximized. Excellent blocking power against heavy metals, especially iron.
Seg DN S	Silicic acid system	Silicate				By controlling the decomposition of hydrogen peroxide , whiteness of the dyed product is guaranteed. By not including silicic acid, removal of various impurities and scabs of the dyed product is maximized. Excellent blocking power against heavy metals, especially iron.
Segon HP	Residual fruit neutralizer	Special Weapon Salt	Yellowish transparent liquid	Bionic	3~7 g/ℓ	After hydrogen peroxide bleaching of cotton, the rinsing process can be omitted and a single neutralization is sufficient.

5. Sequestering Agent

product	use	Main composition	appearance	Ionic	amount used	characteristic
Segcalon DK	Anti-reattachment metal ion sequestrant	sodium acrylic lake	Yellowish liquid	Anionic	2~5 g/ℓ	It has a blocking effect on metal ions and prevents re-attachment of impurities through excellent dispersion effect . Alkali resistance
Segcalon K-3000	Metal ion sequestration purifier	Special polymer blends	white powder		1~3 g/ℓ	Enhances refining and bleaching effects by blocking metal ions . Promotes dye penetration and adsorption. Prevents discoloration and color yield reduction.
Segtalon SQ	Anti-reattachment metal ion sequestrant	Special polymerization mixture	Yellowish transparent liquid	Bionic/ Anionic	2~4 g/ℓ	Excellent metal ion sequestration and chelating effect of heavy metals. Excellent chelating effect at pH 4~10.5.

6. Dyeing Auxiliary

product	use	Main composition	appearance	Ionic	amount used	characteristic
Segdamche MN	Carrier for polyester dyeing	Metal naphthalene and special anionic compounds	Brown transparent liquid	Bionic/ Anionic	5~15% (based on fabric weight)	High dyeing concentration is achieved, and the effect is excellent in case of deep coloring. There is no tapping phenomenon, and it is excellent in preventing stains, etc.
Segdamche MCK	Carrier for polyester dyeing	Methyl naphthalene and special anionic compounds	Yellow transparent liquid	Anionic	5~15% (based on fabric weight)	Extremely high dyeing concentrations are achieved by excellent carrier effects , and the effect is particularly noticeable in the case of deep coloring.
Segment carrier TCB	White dragon carrier	Fluorobenz- Ene and Special Compounds	Yellow transparent liquid	Bionic / Anionic	2~5 g/ℓ	Application to single-bath fluorescent bleaching of polyester products using sodium chlorite . Excellent emulsion stability.
Segdamche T-60	White dragon carrier	Fluorobenz- Ene Special Compound	Yellowish transparent liquid	Bionic/ Anionic	2~4 g/ℓ	It has excellent emulsion stability and does not affect the light, washing, and friction fastness of fluorescent dyes.

7. Crease Proof Agent

product	use	Main composition	appearance	Ionic	amount used	characteristic
Segcaeaes Q2	Heavy duty flexible and anti-static agent	Special anionic ester	milky white liquid	Anionic	1~3% (based on fabric weight)	Excellent effect in preventing fold marks and rope marks that occur during the dyeing process . No side effects on dyeing and improves dyeing stability.
Segsoft Seth	Softener in the bath		Light yellow liquid

8. Dispersing/Levelling/Retarding Agent

product	use	Main composition	appearance	Ionic	amount used	characteristic
Segdisper Seg D-500	Special carrier dispersion leveling agent	Diphenol derivatives and special emulsions	light yellow liquid	Anionic/ Bionic	0.5~1 g/ℓ	When dyeing polyester fibers at high temperature and high pressure , strong penetration and leveling power are achieved. Excellent dye solubility and dispersibility prevents tangle formation .
Segdisper PDR C/C	High concentration pet dispersant	Aromatic interfacial sulfurizing agents and fatty acid esters	light yellow liquid	Bionic/ weakly anionic	0.5~2 g/ℓ	Excellent build-up for blended fabrics and woven fabrics of cotton and synthetic fibers (pet), so dyeing is possible. After pretreatment, residues are removed, so there are almost no dyeing accidents, and the color of the dyed material is vivid.
Segdisper D-50	High temperature, high pressure dispersion leveling agent	Alcohol-based nonionic and anionic compounds	light yellow liquid	Bionic/ weakly anionic	2~4 g/ℓ	There is no error due to air bubbles when using a quick dyer . There is no tering phenomenon due to dye injection and coagulation . Good penetration and leveling properties. Prevents contamination of dyeing machine. There is no fading of dye or color staining.
Segdisper PFW	Special high temperature and high pressure dispersing leveling agent	Aromatic interfacial sulfurizing agents and fatty acid esters	light yellow liquid	Bionic/ weakly anionic	1~3 g/ℓ	High concentration pet dispersant. Improves dyeability with strong penetrability, and excellent dyeing and dispersibility with small amount.
Seglevel AS	Acid dye leveling agent	Special nonionic alkylamine derivatives	Brown liquid	Anionic/ Bionic	1~2 g/ℓ	Maintains vivid colors in dyeing wool, wool and blended fabrics . Promotes dye migration during dyeing, provides leveling properties and covers the barrier. Excellent effect. Improves final dyeability.
Seglevel RD-30	Reactive dye penetrating leveling agent	Polymer activator	Colorless transparent liquid	Anionic/ Bionic	0.5~1.5 g/ℓ	When used directly on cotton, T/C, etc., when dyeing with reactive dyes , dye spots disappear, and the leveling properties and metal ion blocking power are excellent, so that uniform and vivid colors can be obtained during dyeing.
Segurtad A	Retardant for acrylic fibers	Special cationic activator	Yellowish liquid	Cationic	0.5~2% (based on fabric weight)	Controls rapid dyeing with excellent dyeing slowing effect when dyeing with cationic dyes on acrylic fibers . Significantly reduces heating temperature. Does not adversely affect various fastnesses.

9. Fixing Agent

product	use	Main composition	appearance	Ionic	amount used	characteristic
Segpix NF-100	Acid dye fixative	Polyphenol condensate	Brown liquid	Anionic	2~6% (based on fabric weight)	Improves wet fastness when dyeing nylon with acid dyes . No discoloration, dye loss, or color change on nylon fibers . Maintains hand feel and fastness better than tannic acid.
Segpix FX-250	Direct dye and reactive dye fixatives	polyamine derivatives	Yellowish transparent liquid	Cationic	1.3% (based on fabric weight)	Excellent fixation of direct and reactive dyes. Improved fastness to water, washing and sweat.
Segpix FX-500	Reactive dye fixative	polyamine derivatives	Yellowish transparent liquid	Cationic	1.3% (based on fabric weight)	Excellent fixation effect of direct and reactive dyes. Does not affect color change after dyeing and changes in the feel of fabric .
Segpix FX-600	Direct dye fastness enhancer	Tishiandi-amide	Yellowish transparent liquid	Cationic	1.5% (based on fabric weight)	Improves the washing and washing fastness of direct dyed fabrics . There is no discoloration or dye migration during washing .

10. Soaping Agent/Reduction Cleaning Agent

product	use	Main composition	appearance	Ionic	amount used	characteristic
Segbinu SA	Refined soap base	Special anion activator	Yellowish liquid	Bionic/ weakly anionic	1~3 g/ℓ	It has excellent refining and shopping properties, strong penetrability and alkali resistance. It has excellent dispersing power and anti-reattachment power.
Segbinu SM-130	Low-foaming reactive soaping agent	Polyhydric alcohol fatty acid esters and special anionic compounds	Yellowish liquid	Bionic/ weakly anionic	2~4 g/ℓ	Excellent anti-contamination power for dyeing and dyeing .. Excellent solubility in cold water due to low foaming . Removes non-fixed reactive dyes. Prevents dye discoloration .
SegSour TS	Low-foaming soap coating agent	Polyhydric alcohol fatty acid esters and special anionic compounds	Yellowish liquid	Bionic/ weakly anionic	2~4 g/ℓ	Excellent in removing unfixed reactive dyes and preventing discoloration of dyes, contributing to increased color yield. Excellent in improving color and fastness.
Segduct RCL	Reduction cleaning and post-treatment agent	Polyhydric alcohol lactate	Yellowish brown liquid	Ambivalent	0.5~1 g/ℓ	Polyester. Vivid color and improved fastness when working with T/A, T/W, T/C, and T/R by single-bath, single-bath, and two-bath dyeing methods . Avoidance of use of caustic soda when reducing T/W blends .

11. Anti-Static/Anti-Slip/Anti-Flame Agent

product	use	Main composition	appearance	Ionic	amount used	characteristic
Segantista AZ	Anti-static agent	Special cationic compounds	Colorless transparent liquid	Cationic	2~4% (based on fabric weight)	After treatment and drying, it forms a film on the surface of hydrophobic fibers, providing excellent anti-static effect. There is no rust at all on the processing pins or pin cloth.
Segantista P-200	Bionic antistatic agent	Polyhydric alcohol fatty acid ester	light yellow liquid	Bionic	0.5~1.5% (based on fabric weight)	Since it is nonionic, it can be used in combination with other processing agents. It provides smoothness and flexibility.
Segron AP	Flame retardant for synthetic fibers	Special Weapon Salt	Colorless transparent liquid	Cationic	20 ~100 %	Excellent light resistance, corrosion resistance, and high flame retardancy in sheets, covers, curtains, etc. Good compatibility with water repellents.
Segantislip SP	Anti-slip agent	Special Weapon Salt	Translucent liquid	Weakly anionic	1~3% (based on fabric weight)	An anti-slip finishing agent for 100% polyester fabrics, woven fabrics, and silk fabrics. When used in large quantities, the touch of the fabric deteriorates.

12. Water Repellent Agent

product	use	Main composition	appearance	Ionic	amount used	characteristic
Segsilicon SG-100	Silicone-based water-repellent treatment agent	Silicone emulsion	Milky white milk	Bionic	3~5%	A water -repellent agent with excellent breathability and durability that also shows flexibility. There is no generation of insoluble matter or clogging errors when used. It can be treated with resin and additives in the same bath, and has excellent washing fastness.
Segsilicon CAT	Silicone-based water-repellent treatment catalyst	Special polymer compounds	Yellowish liquid	Bionic	1/12~1/16 of SG-100	Excellent stability as a solution, unlike general dispersed silicone catalysts .
Seggard 300	Fluorine-based water-repellent oil -repellent treatment agent	Fluorine polymer compound	Milky white milk	Weak cationic	2~4%	Curing with a fluorine-based water-repellent, oil-repellent stain-repellent treatment agent provides a water-repellent effect that is resistant to washing and dry cleaning. Provides excellent water-repellent and oil-repellent properties.

13. Silicone Softener

product	use	Main composition	appearance	Ionic	amount used	characteristic
Segsilicon AM-20	Amino silicone type softener	Amino silicone emulsion	Clear liquid	Weakly cationic	3~8 g/ℓ	Softening agent for cotton and T/C blends. Provides semi-permanent smoothness to treated fabrics. Provides flexible resilience.
Segsilicon AM-300	Amino silicone type softener	Amino silicone emulsion	Clear liquid	Weakly cationic	1~3 g/ℓ	Provides semi-permanent smoothness to fabrics treated with a flexible smoothing agent such as cotton or T/C blended fabrics . There is no decrease in fastness.
Segsilicon AM-50	High concentration silicone softener	Amino silicone emulsion	Clear liquid	Weakly cationic	1~3 g/ℓ	High concentration silicone-based softener. Provides excellent durability and a soft touch.
Segsilicon AK-501	Low-yellowing silicone-based softener	Modified amino silicone special softener	Blue transparent liquid	Weakly cationic	3~8 g/ℓ	Suitable for cotton knit fabrics due to low yellowing. Improves elasticity, wrinkle recovery and provides rebound elasticity. Excellent durability against washing, etc.
Segsilicon AK-700	Amino silicone type softener	Modified amino silicone special softener	milky white liquid	Weakly cationic	3~8 g/ℓ	A flexible finishing agent widely used in natural and synthetic fiber blends . Provides a glossy, soft texture and a thick, voluminous feel.
Segsilicon AMK	Silicone elastomer flexible processing agent	Special reactive silicone elastomer emulsion	Milky white milk	Weakly cationic	3~8 g/ℓ	A reactive silicone-based softener that provides a soft, rich, and smooth touch unique to elasticity . Treated for high-quality consumable fabrics, 100% cotton fabrics and knits, cotton velour, etc.
Segsilicon NSY	Non-yellowing silicone- based softener	Modified amino silicone special softener	Transparent liquid	Weakly cationic	3~8 g/ℓ	Suitable for cotton knit fabrics with no yellowing , improves elasticity, wrinkle recovery and provides rebound elasticity.
Segsilicon PHS	Dimethyl silicone type flexible smoothing agent	Dimethyl siloxane emulsion	Milky white milk	Bionic	3~8 g/ℓ	Provides smoothness and flexibility when used as a pre-dyeing additive. Since it is nonionic, it has good compatibility with various fiber processing agents.
SegSilicon QSS	Amino silicone type softener	Amino silicone mixture	Yellowish transparent liquid	Weakly cationic	3~8 g/ℓ	Rich in smoothness and excellent slipperiness. Improves elasticity and provides volume. Provides excellent rebound elasticity to knitted fabrics.
Segsilicon SWL	Absorbent modified silicone softener	Colorless transparent liquid	Clear liquid	Weakly cationic	3~8 g/ℓ	Excellent water absorption due to excellent hydrophilicity. Suitable for treatment of white matter as there is no yellowing. Excellent compatibility with other resin products.
Seg Cheese PCS	Cheese oil for dyeing	Advanced fatty acid derivatives and silicone compounds	Milky white dough	Cationic	3~6% (based on fabric weight)	Prevents yarn breakage during weaving and knitting of blended fabrics . Excellent emulsification and dispersibility.

14. Softening Agent

product	use	Main composition	appearance	Ionic	amount used	characteristic
Segsoft CN	General softener	Advanced fatty acid amine emulsion	Milky white flakes	Cationic	3~8 g/ℓ	Improved moisture, hand feel, and elasticity with rich smoothness in natural, synthetic fibers and blended products . Good napping properties and no decrease in friction fastness.
Segsoft ACN	General softener	Advanced fatty acid amine emulsion	Milky white flakes	Weakly cationic	3~8 g/ℓ	Used in natural and synthetic fibers and their blends to improve elasticity and provide thick volume. Less color change in dyed products.
Segsoft SCN	Softener for acrylic fibers	Advanced fatty acid amine condensate	Off-white flakes	Cationic	3~8 g/ℓ	Improves elasticity and adds volume to natural and synthetic fibers and their blends . Provides excellent flexibility to acrylic fibers.
Segsoft ASF	Anionic softener	Special anionic surfactant	Light yellow dough top	Anionic	3~8 g/ℓ	Adds smoothness and hand feel to cotton and low-waisted media . Avoid use with fluorescent dyes and compatible cationic agents.
Segsoft ACE	Hygroscopic softener	Advanced fatty acid amine emulsions	Off-white liquid	Weakly cationic	3~8 g/ℓ	Provides moisture absorption with a hydrophilic softener. Prevents yellowing and provides antistatic properties. Has strong moisture absorption and low yellowing.
Seggimo GM-70	Softener for fabric processing	High melting point wax and artificial wax blends	milky white liquid	Bionic/ weakly anionic	3~8 g/ℓ	Excellent absorbency and pile promotion of treated fabrics. Contains strong rust prevention properties.
Seggimo GM-70S	Softener for fabric processing	High melting point wax and artificial wax blends	milky white liquid	Bionic/ weakly anionic	3~8 g/ℓ	Excellent absorbency and pile promotion of treated fabrics. Contains strong rust prevention properties. Provides slight water repellency to cotton.
Segtex US-30	Rebound elastic urethane resin	Polymer resin mixture	milky white liquid	Bionic/ weakly anionic	2~7 g/ℓ	Provides flexibility to natural and synthetic fibers. Excellent resilience, recovery and wrinkle resistance. Almost no yellowing.
Segtex ULX	U/V blocker	Benzophenone type	Milky white discharge	Bionic	1~3% (by weight of solution)	It has excellent UV protection performance and is convenient and stable to use in combination with a softener or post-processing manufacturing .

15. Machine detergent

product	use	Main composition	appearance	Ionic	amount used	characteristic
Segphone RNX	Silicone sticky substance remover	Special surfactant	Light yellow transparent liquid	Weakly cationic	12~20 g/ℓ	Removes sticky substances from denatured silicone and dimethyl silicone with a super strong detergent . No change in the physical properties of the fabric after treatment.
Segclean CL-300	Machine scale remover	Amphoteric surfactant	Brown transparent liquid	Ambivalent	1~3 g/ℓ	Removal of old residue from dyeing machines and oligomers generated during PET dyeing. Excellent ability to prevent re-attachment of various contaminants.

16. Bio

product	use	Main composition	appearance	Ionic	amount used	characteristic
SegBio 250	Stone washing	Cellulase	White powder	neutrality		It is excellent for color treatment of jeans and cotton products with super strong stone washing detergent . The fabric is soft after treatment.

Picture

Category	Details
Product Name	SW-87 (Scouring & Oil Removing Agent)
Description	SW-87 is an oil-removing agent used in the pre-treatment process for all types of fibers. Stable in alkaline solutions and provides a whitening effect during bleaching. Ideal for cold pad batch (C.P.B.) processes thanks to its strong wetting and alkaline stability. Certified under Oeko-Tex Standard 100, SVHC(REACH), APEO-free, and formaldehyde-free. Eco-friendly formulation.
Properties	Appearance: Translucent liquid Composition: Special nonionic/anionic derivatives Ionic Character: Nonion/Anion pH: 6.5 ± 0.5 (1% aqueous solution) Solubility: Easily soluble in cold water
Characteristics	- Excellent scouring and wetting performance - High wetting and washing ability - Exceptional alkaline stability - Fast penetration in C.P.B. process - Effective across varying water conditions
Application Method	Use 1.0–2.0 g/L depending on material type and treatment process Effective regardless of temperature

Category	Details
Product Name	SW-87C (Scouring & Penetrating Agent)
Description	SW-87C is a concentrated scouring agent designed to remove primary (fat, wax, color) and secondary (sizing agents, knots) impurities from cotton and blends. Provides excellent penetration and emulsification of wax with low foaming. Suitable for textiles meeting Oeko-Tex Standard 100, REACH SVHC, APEO-free, formaldehyde-free requirements. Environmentally friendly formulation.
Properties	Appearance: Translucent liquid Composition: Special nonion/anion derivatives Ionic Character: Nonion/Anion pH: 6.5 ± 0.5 (1% aqueous solution) Solubility: Easily soluble in warm water
Characteristics	- Highly concentrated formula usable at half the dose of standard agents - Effective wax removal and emulsification - Maintains dyeing affinity - Extremely low foaming across temperature ranges - Quick defoaming prevents issues in discharge/wastewater - Excellent alkali stability for continuous scouring
Application Method	General use: 0.5–0.7g/L depending on fabric type and treatment conditions Effective regardless of temperature

Category	Details
Product Name	CM-800 (Sequestering Agent)
Description	CM-800 is a multifunctional metal ion blocking agent that removes various ions present in industrial and underground water. Prevents dyeing defects by sequestering heavy metals such as iron, calcium, and magnesium. Provides excellent scale prevention and dispersion for other metal ions. Certified under Oeko-Tex Standard 100, SVHC(REACH), APEO-free, and formaldehyde-free. Eco-friendly formulation.
Properties	Appearance: Light yellow transparent liquid Composition: Special high copolymer compound Ionic Character: Anionic pH: 8.5 ± 0.5 (1% aqueous solution) Solubility: Easily soluble in cold water
Characteristics	- Stabilizes hydrolysis in both acidic and alkaline baths - Excellent chelating ability for various metal ions - Prevents scale formation on equipment surfaces - Increases whiteness during bleaching - Blocks redeposition of oil and sizing agents onto fibers
Application Method	Recommended dosage: 1.0–2.0 g/L depending on water quality and process conditions
Test Name	Chelating Test
Test Date	2012.03.28
Test Location	seogwang R&D Center
Objective	Evaluate the chelating ability of CM-800 against various metal ions (Ca²⁺, Mg²⁺, Fe²⁺, Fe³⁺) to prevent precipitation and agglutination.
Test Method	- Prepare separate solutions of CaCl₂ (0.41g/L, 1500ppm), MgCl₂·6H₂O (0.36g/L, 1000ppm), FeCl₂·4H₂O (0.14g/L, 1000ppm) - Add 1g/L of MONO CM-800 into each solution - Add 1mL of NaOH (10%) to each beaker - Heat each solution at boiling point for 10 minutes - Let cool and observe agglutination and clarity - Determine performance by reduced precipitate generation and increased solution transparency
Evaluation Criteria	- Clarity: Indicates successful chelation - Less precipitate: Indicates better dispersion & metal ion blocking performance - Optimal pH environment: Maintains stability of chelating agent
Visual Observations	Beakers labeled Ca²⁺, Mg²⁺, Fe²⁺, Fe³⁺ displayed notable clarity and minimal agglutination post-treatment with MONO CM-800.

Category	Details
Product Name	SW-PRBC (Penetrating & Scouring Agent for CPB)
Description	SW-PRBC is a high-performance penetrating and scouring agent optimized for the Cold Pad Batch (CPB) process. Provides superior cleaning power and oil removal capability. Features excellent penetration and dispersibility under high alkali conditions. Environmentally friendly product—free from Nonyl Phenol and APEO, with high biodegradability.
Properties	Appearance: Transparent liquid Composition: Anions and complex non-ion Ionic Character: Anionic pH: 3.0 ± 0.5 (10% solution) Solubility: Easily soluble in cold and hot water Alkali Stability: Stable with 150g/L NaOH (50%)
Characteristics	- Outstanding detergency and oil removal - High penetration rate enhances CPB efficiency - Excellent re-dispersibility and stability in high alkali environments - Improves absorbency post-bleaching - No Nonyl Phenol / APEO — fully eco-safe and decomposable
Application Method	CPB Process (Cold Pad Batch - N/C fabric) - H₂O₂ (35%): 70g/L - NaOH (50%): 100g/L - SW-PRBC: 5–10g/L - Peroxide Stabilizer: 7g/L - Desizer: 5g/L - Metal Ion Complexing Agent: 5–10g/L Condition: Pick-Up 90–100%, Store 12 hrs, then wash with hot followed by cold water.

Category	Details
Product Name	ST-1002 (Silicate-Free Stabilizer for Peroxide)
Description	ST-1002 is a newly developed silicate-free stabilizer for peroxide, used in one-bath desizing, scouring, and bleaching processes of T/C fabrics and continuous processes of cotton woven fabrics. Provides soft handle to fabrics and maintains tensile and tearing strength. Excellent anti-scale performance for continuous bleaching. Certified by Oeko-Tex Standard 100, SVHC(REACH), APEO-free, Formaldehyde-free — eco-friendly formulation.
Properties	Appearance: Transparent light yellow liquid Composition: Silicate-free stabilizer for peroxide Ionic Character: Anionic pH: 6.0 ± 0.5 (1% aqueous solution) Solubility: Easily soluble in cold water
Characteristics	- Superior stabilizing effect compared to sodium silicate - Non-foaming type - Excellent dispersibility prevents reattachment of impurities - Improves scouring efficiency - Eliminates scale formation from sodium silicate in machines
Application Method	General usage: 1.0–2.0 g/L depending on process conditions
Test Name	Measurement of Residual Hydrogen Peroxide
Test Location	seogwang CHEMICAL CO., LTD. RESEARCH CENTER
Objective	To evaluate the effectiveness of ST-1002 in stabilizing hydrogen peroxide by comparing residual concentration levels post-processing.
Processing Conditions	- Caustic soda (NaOH): 2% - Sequestering agent: 1% - Scouring agent: 1% - Hydrogen peroxide (35%): 6g/L - Stabilizer (ST-1002): 1g/L - Temperature: 116°C - Duration: 60 minutes - Cooling: Indirect post-processing
Measurement Method	Residual peroxide concentration measured using standard peroxide measuring stick after cooling. Visual comparison of samples labeled "DABONG" and "HANA".
Results	- Sample “DABONG”: >30ppm residual peroxide - Sample “HANA”: >30ppm residual peroxide Both samples maintain peroxide levels, indicating good stabilizing performance by ST-1002.
Visual Observation	Experimental setup includes two circular containers and a cylindrical measuring device. Appearance supports results stated above.
Product Name	ZYM-50 (Peroxide Reducing Agent)
Description	ZYM-50 is a microbial peroxide remover used in textile bleaching processes. Effectively decomposes hydrogen peroxide at room temperature without damaging fabrics. No impact on dyes or white fabrics. Contributes to shorter work time, water-saving, and reduced wastewater. High stability even in summer and maintains effect at 50℃. Environmentally safe (Oeko-Tex, REACH SVHC, APEO-free, Formaldehyde-free).
Properties	Appearance: Brown liquid Composition: Catalase Ionic Character: Nonionic pH: 7.0 ± 0.5 (1% solution) Solubility: Easily soluble in cold water
Characteristics	- Complete H₂O₂ decomposition at room temperature - No impact on dyes or fabric whiteness - Reduces washing time and cost - Maintains excellent stability under heat and storage - Effective at relatively high temperatures (up to 50℃)
Application Method	Dosage: 0.05–0.08 g/L Temperature: 20–50℃ (Optimal: 40–50℃) pH: 5–8 (Optimal: 5.5–7.5) Time: 15–20 min (adjust depending on enzyme usage)
Usage Process	1. Remove bleaching liquid 2. Recharge bath and add dye as appropriate
Test Name	Peroxide Reduction Test using ZYM-50
Objective	Verify the hydrogen peroxide decomposition capability of ZYM-50 under ambient temperature conditions (20–50℃).
Process Conditions	- pH: Approximately 5–8 (Adjusted using acetic acid) - Temperature: 20–50℃ (Cold water usable) - ZYM-50 dosage: 0.05 g/L - Time: 15–20 minutes Note: After reaction, dyeing process starts directly without bath change.
Observation Notes	- Impurity levels vary depending on fabric cleanliness or prior treatments - Recommendation: For heavily soiled fabrics or precautionary treatment, remove overflow water to clear impurities before dyeing
Stability	- Maintains decomposition effect for at least 6 months at 40℃ storage - No decrease in catalytic activity during this period

Category	Details
Product Name	CEL-30L (Enzymes to Reduce Weight)
Description	CEL-30L is a cellulase-based enzyme for gloss enhancement and anti-pilling treatment on cellulose fibers. It minimizes fiber damage while removing fuzz, making it suitable for bio-processing and weight loss treatments. Applicable to polynosic, Tencel, and other cellulosic fabrics. Certified under Oeko-Tex Standard 100, SVHC(REACH), APEO-free, and formaldehyde-free — fully eco-safe.
Properties	Appearance: Brown liquid Enzyme Class: Cellulase Composition: Enzymes and inorganic salts pH: 5.0 ± 0.5 Solubility: Easily soluble in water Storage Stability: Stable for 6 months at 5–30℃ in sealed original container
Characteristics	- Contains strong Cx (CMCase) and C1 enzymes for crystalline cellulose breakdown - Second-generation cellulase with reduced fabric loss and enhanced defuzzing - Compatible with pre- and post-treatment dyeing processes - Improves softness when followed by Amino Silicone Softeners - Optimal for bio-processing, raising removal in polynosic and Tencel fabrics
Application Method	- Active pH range: 3.0–6 (Optimal: 4.5–5.0) - Enzyme activity significantly reduced below pH 2.0 or above pH 8.0 - Effective temperature range: Room temperature to 60℃ (Optimal: 50–60℃) - Thermal stability: Maintains 100% activity at 55℃ for 10–15 min - Enzyme activity completely removed at 80℃ - Recommended dosage: 0.2–0.3 g/L
Notes	- Store in a cool, dark place away from direct sunlight to preserve enzyme activity - Avoid contact with eyes and mouth; rinse thoroughly if exposed

Category	Details
Product Name	DBS-180D (Enzyme Desizing Agent)
Description	DBS-180D is an alpha-amylase based enzymatic desizing agent with excellent penetration and rapid action. Enhances fabric whiteness and is highly effective even under alkaline conditions. Surface-active and eco-friendly — certified under Oeko-Tex Standard 100, SWERECOAB, APFO-free, formaldehyde-free.
Properties	Appearance: Light yellowish semi-transparent liquid Enzyme Class: Alpha-amylase pH: 7.0 ± 0.5 (1% aqueous solution) Solubility: Easily soluble in cold and warm water Odour: Slight fermentation odour
Characteristics	- No interference with dyeing or finishing - Excellent heat resistance and process control - Enhanced desizing when used with alkali - Improves wettability and prevents re-deposition - Economical — effective at low dosage - Readily biodegradable
Application Method	Dosage: 2–4 g/L Temperature: 30–80℃ Time: 30–40 minutes x30~60 mins. pH: 5.0–10.0 Liquor Ratio: 1:4 to 1:10
Storage	Stable for at least 3 months at 25℃. Avoid prolonged exposure to higher temperatures.

Category	Details
Product Name	SP-3040 (Scouring Agent for Acryl Fiber)
Description	SP-3040 is a multifunctional polymer emulsion scouring agent used in the pre-treatment of acrylic fibers. Offers excellent wetting, penetrating, and cleaning performance—even under hard water conditions. Maintains stability in highly alkaline baths and operates effectively across a wide water hardness range. Low-foaming formulation enhances continuous processing efficiency.
Properties	Appearance: Translucent liquid Composition: Alkyl Alcohol EO/A Ionic Character: Nonionic pH: 7.0 ± 0.5 (10% aqueous solution) Solubility: Easily soluble in cold water
Characteristics	- Excellent wetting and scouring effect in continuous process - Highly stable in strong alkaline environments - Effective across diverse water conditions - Low foaming for high-speed operations
Application Method	Dosage: 0.5–1.0 g/L Temperature: Effective regardless of temperature Usage may vary depending on material and treatment conditions

Category	Details
Product Name	SP-3030 (Scouring Detergent for Wool)
Description	SP-3030 is an eco-friendly detergent designed for pre-washing wool fabrics. Offers exceptional washing, dispersing, and emulsifying power—ideal for high-speed machines like jet or overflow washers. Contains anti-foaming agents and meets Oeko-Tex Standard 100 for safe textile processing. APO-free and formaldehyde-free formulation.
Properties	Appearance: Translucent liquid Composition: Special nonionic/anion derivatives Ionic Character: Nonionic/weakly anionic pH: 6.5 ± 0.5 (1% aqueous solution) Solubility: Easily soluble in cold water
Characteristics	- Outstanding scouring and wetting performance - Especially suited for wool pre-cleaning - High alkaline stability - Excellent emulsification of oils and fats - Effective in various water conditions
Application Method	Dosage: 0.5–1.0 g/L Temperature: Effective regardless of temperature Usage depends on material and treatment conditions

Category	Details
Product Name	WT-3800 (Leveling Agent for Reactive Dyes)
Description	WT-3800 improves dispersibility and leveling of reactive and direct dyes, minimizing color irregularities. Especially beneficial for R/T dyeing processes, reducing re-dyeing and boosting productivity. Environmentally friendly formulation—SWCR(ARCH), APFO-free, Formaldehyde-free, and compliant with Oeko-Tex Standard 100.
Properties	Appearance: Yellow transparent liquid Composition: Alkyl compound Ionic Character: Anionic pH: 6.5 ± 0.5 (1% aqueous solution) Storage: May coagulate in winter
Characteristics	- Excellent leveling and penetration - Strong emulsification and dispersion - Prevents dye cohesion post-alkali input - Enhances direct dye exhaustion and clarity - Works effectively in acid-basic mixed dyeing - Low-foam formulation minimizes usage issues
Application Method	Dosage: 0.5–1.0% o.w.f Depends on fiber type and dyeing machinery conditions

Category	Details
Product Name	D-TRA (Dispersing & Leveling Agent)
Description	D-TRA is a high-concentration dispersing and leveling agent for polyester dyeing, offering excellent stability against acids and alkalis. It demonstrates outstanding dispersibility and penetrability even at high temperatures, making it suitable for cheese dyeing and beam dyeing processes without shade variation. Free from APEO and formaldehyde, it is an eco-friendly product that meets OEKO-TEX and SVHC (REACH) standards.
Properties	Appearance: Deep yellow transparent liquid Composition: POE fatty acid ester + anionic compound Ionic Character: Anionic pH: 7.0 ± 0.5 (10% aqueous solution) Solubility: Easily soluble in hot and cold water
Characteristics	- Highly concentrated and free of foam - Excellent dispersibility even at high temperatures - Superior penetrability into filaments - No tar formation at high temperatures - Optimized for polyester dyeing processes
Application Method	Dosage: 0.2–0.5 g/L Usage may vary depending on textile and treatment conditions

Category	Details
Product Name	PAN-50 (Leveling Agent for Acrylic Fiber)
Description	PAN-50 is an excellent leveling agent for acrylic and union dyestuffs. Delivers uniform dye penetration from room temperature to boiling point—preventing uneven coloration. Promotes smooth migration and absorption of dyestuffs. Environmentally friendly and suitable for Oeko-Tex Standard 100 certifications. APO-free and formaldehyde-free formulation.
Properties	Appearance: Colorless transparent liquid Composition: Quaternary ammonium salt compound Ionic Character: Cationic pH: 7.0 ± 0.5 (20% aqueous solution) Solubility: Easily soluble in cold water
Characteristics	- Ideal leveling agent for acrylic blends - No dye residue after bath completion - Consistent performance across temperature ranges - Low foam—suitable for high-speed operations
Application Method	Dosage: 0.5–1.0% o.w.f for deep color 1–2% o.w.f for medium color 2–3% o.w.f for light color Usage varies depending on material and treatment method

category	Details
Product Name	L-VL (Leveling Agent for Cationic Dyestuffs)
Description	L-VL is an excellent leveling agent for acrylic fiber with cationic dyestuffs. Delivers consistent leveling performance from room temperature to boiling, preventing dyeing irregularities. Offers penetration and migration assistance during dye absorption. Certified Oeko-Tex Standard 100, REACH SVHC, AP(EO)-free, and formaldehyde-free. Eco-friendly formulation.
Properties	Appearance: Slight yellowish liquid Composition: Nitrogen compound Ionic Character: Cationic pH: 5.0 ± 0.5 at 20°C (0.5% aqueous solution) Solubility: Easily soluble in cold water
Characteristics	- Optimized for cationic dyestuff leveling - No residual dye left in bath post-process - Consistent effect across temperature range - Low-foaming profile
Application Method	Deep color: Use 0.5–1.0% o.w.f Medium color: Use 1.0–2.0% o.w.f Light color: Use 2.0–3.0% o.w.f Adjust depending on material and treatment conditions

Category	Details
Product Name	LUB-206K (Crease Inhibitor)
Description	LUB-206K prevents creases of cotton, polyester, rayon, rayon acetate and high-multi fiber woven/knitting goods. Helps avoid off-process dyeing and provides excellent lubricating and softening properties. Used in the pre-treatment process to stabilize and lubricate fiber materials during dyeing. Suitable for Oeko-Tex Standard 100, REACH SVHC, APFO-free and formaldehyde-free certified textiles. Eco-friendly formulation.
Properties	Appearance: Light yellow transparent liquid Composition: Modified Polyamine Ionogenicity: Nonion pH: 7.0 ± 0.5 (1% aqua solution) Solubility: Easily soluble in cold water
Characteristics	- Excellent dye-bath lubricant with anti-static effect - Reduces friction coefficient and prevents creasing during pre-treatment and dyeing - Functions as anti-crease agent - Low foam and stable at high temperature
Application Method	General dosage: 1–3g/L depending on material and treatment conditions

Category	Details
Product Name	LUB-206KC (Crease Inhibitor)
Description	LUB-206KC is designed to prevent creases in cotton, polyester, rayon, rayon acetate, and high-multi fiber knitted/woven goods. Acts in both dyeing and scouring processes for excellent lubrication and softness. Reduces static and friction; prevents off-process dyeing defects. Certified Oeko-Tex Standard 100, SYNCO/REACH, APFO-free, formaldehyde-free. Eco-conscious formulation.
Properties	Appearance: White powder Composition: Modified Polyimide Ionogenicity: Nonionic pH: 7.0 ± 0.5 (1% aqueous solution) Solubility: Soluble in water at 70°C or higher
Characteristics	- Excellent anti-crease lubrication with anti-static effects - Reduces friction during high-temp treatment - Compatible with synthetic and natural fibers - Low foam, high temperature stability
Application Method	Dosage depends on fabric type and processing conditions (exact amount not specified)

Category	Details
Product Name	SP-PDR (Soaping Agent for Reactive Dyes)
Description	SP-PDR improves fastness and removes hydrolyzed dye residues after reactive dyeing. Prevents defects from poor wash-off in 100% cotton and colored garments. Enhances color stability and reduces washing time, water usage, and wastewater volume. Especially effective in short-time processing for reactive dyes. Eco-friendly and cost-efficient.
Properties	Appearance: White powder Ionic Character: Nonionic/Anionic pH: Weak alkaline Solubility: Easily soluble in warm water
Characteristics	- Removes hydrolyzed dye particles completely - Effective at low temperatures (around 80°C) - Prevents scum formation in hard water - Preserves fabric softness after processing - Increases productivity by reducing wash cycles
Application Method	0.2–0.3% o.w.f depending on fiber and depth Black: 0.3% Turquoise/Blue: 0.2% General deep colors: 0.25% Processing temperature: 80–90°C

Category	Details
Product Name	SP-DSRN (Soaping Agent for Reactive Dyes)
Description	SP-DSRN eliminates unfixed dye and prevents re-deposition during reactive dyeing processes. Enhances fastness and resolves issues caused by dye degradation in finishing. Suitable for Oeko-Tex Standard 100, REACH SVHC, APEO-free, and formaldehyde-free certified textiles. Environmentally friendly formulation.
Properties	Appearance: Light yellow transparent liquid Composition: Special nonion/anionic derivatives Ionic Character: Nonion/Anion pH: 7.0 ± 0.5 (1% aqueous solution) Solubility: Easily soluble in cold and hot water
Characteristics	- Effective regardless of salt concentration in bath - Prevents dye re-attachment through superior dispersion/emulsifying action - Stable soaping performance across pH range - Reduces washing cycles and water usage - Works effectively at low temperatures (~80°C)
Application Method	Use 0.3–0.5g/L depending on fiber type and dyeing conditions Recommended processing temperature: 80–90°C

Category	Details
Product Name	FX-700 (Dye Fixing Agent)
Description	FX-700 enhances fixing of reactive and direct dyes during soaping process for cotton and T/C. Effectiveness may vary for sensitive dyes such as turquoise or blue R. Certified Oeko-Tex Standard 100, SVHC(REACH), APEO-free, Formaldehyde-free. Eco-friendly formulation.
Properties	Appearance: Light yellow transparent liquid Composition: Quaternary ammonium type Ionic Character: Cationic pH: 4.0–5.0 (1% aqueous solution) Solubility: Easily soluble in cold water
Characteristics	- Improves color fastness to water, washing, acid, perspiration - No impact on light-fastness or chlorine-fastness - Stable under high curing temperatures - Some sensitive dyes may shift in shade - Compatibility should be pre-verified
Application Method	Dipping Method • Dosage: 1–2% • Time: 15–20 min • Bath Ratio: 1:10 • Temperature: 40–60°C Continuous Method • Dosage: 10–30g/L

Category	Details
Product Name	FX-800 (Formaldehyde-Free Dye Fixing Agent)
Description	FX-800 is a formaldehyde-free after-treatment agent that enhances wet fastness of reactive dyeings and prints. It combines with unwashed hydrolyzed dyes to improve wash performance and prevent shade change. Recommended for textiles certified under Oeko-Tex Standard 100, SVHC(REACH), APEO-free, and formaldehyde-free standards. Environmentally friendly formulation.
Properties	Appearance: Transparent liquid Composition: Polyamine derivative Ionic Character: Cationic pH: 5.5–6.0 (1% aqueous solution) Solubility: Miscible with water
Characteristics	- Does not affect dye shade - Compatible with cationic and nonionic auxiliaries - Improves fastness to water, washing, acid hydrolysis, and perspiration - No effect on light-fastness or chlorine-fastness - Stable under high curing temperatures - Confirm compatibility beforehand due to cationic nature
Application Method	Dipping Method • Dosage: 1–2% • Time: 15–20 min • Bath Ratio: 1:10 • Temperature: 40–60°C Continuous Method • Dosage: 10–20g/L

Category	Details
Product Name	AMS-100 (Silicone Softening Agent)
Description	AMS-100 is a micro-emulsion of high-performance amino-silicone polymer compound. It provides soft, bulky handle with strong elasticity and good emulsion stability. Note: Can cause gum-up in alkaline baths—proper pH regulation is required. Certified Oeko-Tex Standard 100, SVHC(REACH), APEO-free, Formaldehyde-free. Environmentally friendly product.
Properties	Appearance: Light yellow liquid Composition: Amino-silicone compound Ionic Character: Mild cationic pH: 4.5 ± 0.5 (1% aqueous solution) Solubility: Easily soluble in cold water
Characteristics	- Modified micro-emulsion type amino-silicone - Soft and bulky with excellent elasticity - Non-yellowing; suitable for full white fabrics - Avoid alkaline conditions due to gum-up risk
Application Method	Use 2–3% o.w.f depending on fabric type and treatment conditions

Category	Details
Product Name	AMS-100C (High Concentration Silicone Softening Agent)
Description	AMS-100C is a micro-emulsion of highly efficient silicone polymer compound with amino-silicone. Delivers soft and bulky feel with excellent elasticity and superior emulsion ability. pH regulation recommended due to risk of gum-up in alkaline baths. Highly concentrated — over three times stronger than regular silicone softeners. Certified Oeko-Tex Standard 100, SVHC(REACH), APEO-free, Formaldehyde-free. Eco-friendly formulation.
Properties	Appearance: Transparent liquid Composition: Amino silicone compound Ionic Character: Mild cationic pH: 5.5 ± 0.5 (1% aqueous solution) Solubility: Easily soluble in cold water
Characteristics	- Micro-emulsion type modified amino-silicone - Soft, bulky handle with excellent elasticity - May cause gum-up in alkaline baths; pH control needed - High emulsion stability, but can lead to staining or residue in equipment - Non-yellowing, ideal for white or light-colored fabrics
Application Method	Use 0.3–1.0% o.w.f depending on material and treatment method

Category	Details
Product Name	HS-2300 (Self-emulsification Silicone Softener)
Extended Description	HS-2300 enables re-dyeing without removing silicone finish — providing cost advantages in case of dyeing mishaps. Preserves hydrophilicity and delivers a deep, soft, flexible touch even after re-treatment. As a nonionic compound, it is highly compatible with other agents and remains stable in both acidic and alkaline solutions. Suitable for various cotton blends and knitwear.
Usage Conditions	Batch Processing (Exhaustion Method) • Dosage: 0.5 – 1.0% o.w.f • Temperature: 40℃ • Time: 15 – 20 minutes Pad-Dry-Cure (Continuous Method) • Dosage: 10 – 50g/L • Pick-up: 70 – 80% • Drying: 110℃ • Heat-setting: 150℃ for 3 min or 180℃ for 1 min

Category	Details
Product Name	S-DNC (Softening Agent for Cotton)
Description	S-DNC is a non-yellowing softener for cotton and T/C fabrics that provides soft, bulky touch and hydrophilicity. Imparts anti-static properties and is compatible with white fabrics. Certified under Oeko-Tex Standard 100, SYNCHKGRADE, APFO-free, formaldehyde-free. Environmentally friendly formulation.
Properties	Appearance: Flake Composition: Special fatty ester-derived compound Ionic Character: Cationic pH: 4.5–0.5 (10% aqueous solution) Solubility: Easily soluble in hot water
Characteristics	- Non-yellowing, suitable for all white fabrics - Soft and voluminous feel - No color change; enhances water absorbency - Excellent performance on cotton and T/C
Application Method	Use 0.2–0.5% o.w.f depending on material and treatment conditions

Category	Details
Product Name	D-702A (Self-emulsification Silicone Defoamer)
Description	D-702A is a silicone-based defoamer with superior emulsification stability and excellent defoaming performance at high temperature. It effectively breaks existing foam and prevents further foam formation, outperforming non-silicone defoamers. Suitable for textiles certified under Oeko-Tex Standard 100, SVHC(REACH), APEO-free, and formaldehyde-free standards. Environmentally friendly formulation.
Properties	Appearance: Milky white liquid Composition: Special alkyl silicone Ionic Character: Nonionic pH: 7.0 ± 0.5 (1% aqueous solution) Solubility: Easily soluble in cold and warm water Storage: May slightly separate over time; stir before use
Characteristics	- High-temp defoaming efficiency - Effective under wide pH range (3–12), especially in alkaline conditions - Compatible with anionic and nonionic surfactants - Fast and durable defoaming action - Outperforms non-silicone defoamers
Application Method	Recommended dosage: 0.1–0.3% w/w depending on bath conditions

Category	Details
Product Name	D-OIL (Knitting Oil)
Description	In the modern knitting industry, automatic circular knitting machines are used to produce various sock fabrics. This specially formulated economical knitting oil is specifically designed for lubricating the needles of older, slower knitting machines. It offers long service life and exceptionally low friction performance. As a non-staining synthetic oil, it leaves no carbon deposits and provides excellent lubrication, reducing the power requirements of drive systems. With light anti-static and anti-rust properties, it is well-suited for use in high-speed knitting, texturizing, and winding machines used in the textile and polymer industries.
Properties	Appearance: Transparent liquid Chemical Composition: Synthetic formulation Ionic Character: Nonionic
Characteristics	- Easy to clean with water - Prevents machine and surrounding contamination - Non-staining, self-cleaning oil with anti-static and anti-rust effects - Prevents carbon residue and tarnishing - Lowers operating temperature - Reduces power usage by minimizing friction

Category	Details
Product Name	FX-2000 (Wet Rubbing Fastness Improver)
Description	FX-2000 is a polymer-inorganic salt compound designed to improve poor wet rubbing fastness in cotton and various reactive dye fabrics. Maintains original shade and enhances fastness performance while remaining eco-friendly.
Properties	Appearance: White emulsion Composition: Organic phosphate copolymer Ionic Character: Nonionic Viscosity: 1000 ± 100 Thermostability: OK pH: 7.0 ± 0.5 (10% aqueous solution)
Characteristics	- Enhances wet rubbing fastness for reactive dyes containing inorganic salts - Improves dispersion of salts and prevents fastness degradation - Excellent water solubility
Application Method	Padding Method • Usage: 40–80g/L • Treatment: Tenter at 160℉ for 2 min • Standard: ISO105-X12 Wet Rubbing Exhaust Method • Liquor ratio: 1:20 – 1:25 • Time: ± 20 min • Usage: 4–8% owf • Standard: ISO105-X12 Wet Rubbing
Precautions	- Store away from direct sunlight at room temperature - Seal container tightly after use to prevent film formation - Avoid contact with skin and eyes - Water-based product with anti-freeze properties

Category	Details
Product Name	UV-300 (Light Fastness Improver)
Description	UV-300 is a polyester dyeing light fastness enhancer used to improve resistance to fading, especially for applications requiring high durability such as automotive fabrics. Can be safely used in dyeing baths without affecting color or causing physical changes to the fabric. Certified under Oeko-Tex Standard 100, REACH SVHC, APFO-free, formaldehyde-free. Environmentally friendly formulation.
Properties	Appearance: Milky emulsion Composition: Aromatic compounds + special anionic surfactant dispersion Ionic Character: Anionic pH: 7.0 ± 0.5 (5% aqueous solution) Solubility: Easily soluble in cold and hot water
Characteristics	- No color change or alteration in fabric texture - Good dispersibility at high temperature - Fine particle absorption with efficient uptake - Ideal for applications demanding high light-fastness (e.g. car seats)
Application Method	Use 2–4% owf depending on dye type and fabric density * Shake well before use to ensure uniform dispersion

Category	Details
Product Name	BK-1500 (Anti-Redeposition Agent)
Description	BK-1500 is used to prevent contamination during dyeing and printing of cellulose, animal, and synthetic fibers. Especially effective for reactive and acid dyes, helping avoid redeposition and ensuring clean results even on white fabrics or blended knits. Suitable for T/C, T/W, T/R blends where redeposition is a common issue. Eco-friendly formulation.
Properties	Appearance: Yellowish colored liquid Composition: Nonion condensation Ionic Character: Nonionic pH: 5.5 ± 0.5 (1% aqueous solution) Solubility: Easily soluble in cold and warm water
Characteristics	- Prevents contamination during dyeing, printing, and after-treatment - Effective on blended fabrics and white sections of union cloth - High efficiency for dyes with contamination risk (e.g. reactive, acid dyes) - Maintains color clarity and cleanliness across processing stages
Application Method	Printed Textiles (reactive/acid/pre-metalized dyes) • Dosage: 1.0–2.0g/L • Temperature: 60°C × 10 minutes Cellulose Fiber / Union Cloth with Reactive Dyes • Dosage: 1.0–2.0g/L • Temperature: 90°C × 10 minutes
Validity & Storage	- Store in sealed container at room temperature - Long storage may cause slight sedimentation or separation; stir before use - Product performance remains stable after mixing

Category	Details
Product Name	S-307AC (Acrylic Fabric Softener Concentrate)
Description	S-307AC is a high-concentration softener with excellent flexibility, absorbency, and smoothness. Non-yellowing and economical to use, ideal for cotton and towel items. Recommended for fluorescent dye fabrics and commercial seats. Offers good photo protection and hydrophilic properties. Stable and low-sensitivity performance; easy to dilute and apply.
Properties	Appearance: Flake type Composition: Advanced fatty acid ester derivatives Ionic Character: Cationic pH: 5.0 ± 0.5 (10% aqueous solution) Solubility: Easily soluble in hot water (70°C)
Characteristics	- Excellent softness and flexibility - Non-yellowing; ideal for white and fluorescent items - Hydrophilic with plush finish - Highly stable with low sensitivity
Application Method	Dilute to 0.2–0.3% based on textile material and process conditions

Contact Us

SEOGWANG TECH

Headquarters, Factory: 529 Daegodbuk-ro, Daegod-myeon, Gimpo-si, Gyeonggi-do (1,2 buildings)

TEL 031.983.4778 FAX 031.983.4779

e-mail: leebs103@hotmail.com

seogwangtech@gmail.com